Compact Lifter
Use the Compact Lifter to avoid back injuries and to load alone media rolls directly from the ground to the printer with no effort. Handling media rolls is an issue at any print shop. With the Compact Lifter you will be able to feed printers, move heavy rolls with no effort.
|
Compact LifterAn essential piece of equipment for every wide format printer!This lifter works in quite a simple way, only by pressing the footpedal you will lift rolls up to 200 kg. Ref.PHTICL |
Our entry-level media roll lifter to avoid back injuries takes almost no space in your print shop. This lifter works in quite a simple way, only by pressing the footpedal you can easily lift rolls up to 125 cm and 200 kg.
Technologies and Features
- Hydraulic foot pump.
- For rolls up to 200 kg & any width.
- Lifts up to 125 cm.
- Takes up very small floor space – 570 x 650 mm (W x L).
- Lock ramps up to prevent roll from falling.
- Multi directional wheels so you can go through standard doors.
- Rear wheels have breaks to make easy to roll the media up the ramp.
200 kg LOADING CAPACITY |
500 cm FOR ROLLS UP TO |
26 cm MAX. ROLL Ø |
8 cm WHEELS HEIGHT |
125 cm LIFTING HEIGHT |
Support try & Extensions
If you need extra support for 5 m rolls, choose between the suport tray (1400 mm) or the support tray with extensions (2500 mm). Available for Compact Lifter and Compact e-Lifter PRO.
Support tray. Ref: PHTICL-PLATE | ||
Support tray + Extensions. Ref(x2): PHTICL-EXT. | ||